Every filament, sensible starting settings.

Ten common filaments. One clean card each. Tuned for stock nozzles and 0.2 mm layers. Pair with a temp tower on first use, then nudge from there.

Drive

Filament

PLA

Cool, forgiving, easy to print. The default for most makers and a good baseline to test new printers against.

Notes & gotchas

Starting points, not gospel. Every printer, spool, and environment is different. Use these as a first dial, then run a temp tower, a retraction tower, and a flow calibration on any new filament. If your printer's auto-profiles disagree, trust them first, trust this second.